Bolton Kit For

LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder

LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder
LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder
LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder

LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder
Vertical door kit - Engineered & made in Germany by LSD Doors (a KW Automotive company) These are the best quality kits on the market. Front door kit - left & right - Fits. Lamborghini Gallardo Coupe Spyder 03+. LSD Hinge Assembly Limited Lifetime. LSD Gas Spring/Shock 1 year. Note: Photos are for reference only. Actual product contents may vary depending on application. LSD Doors is proud to offer the industries only crash tested Lambo Style Door technology. Using innovative design features and cutting edge materials and production makes LSD Doors the safest functioning kits available on the market.

Opening outward up to 30 Degrees and then upwards up to 40 Degrees offers that true Lambo Style to your vehicle. After 9 years of continued success we strive to offer the best kits on the market with no compromise when it comes to safety. Our mission is to improve the appearance of your vehicle and maintain the factory strength and integrity that an OEM hinge would offer. LSD Doors is a KW Automotive Brand.

Pre-assembled LSD hinges with gas shock. Wire set for vehicle specific extensions of wire harnesses including mounting material. Insulated wire connectors including flexible insulation tape. The LSD door system consists of a specific door hinge which initially opens the factory door 30 degrees outwards, like a common car door and then upwards by the support of a gas shock with minimal effort. The door opens in 2 steps.

Open the door outwards as usual to a maximum angle of approximately 30 degrees. Allowing comfortable access to enter and exit the vehicle.

Lift the door after reaching the opening angle of 30 degrees. This is done with ease as the door is supported by the gas shock to an angle of approximately 40 degrees. The LSD door hinges are installed at the original mounting points of the dismantled factory hinges.

A range of adjustability is built into each LSD door hinge for perfect alignment and operation. Additional features also include limits that prevent the doors from being open too far as well as avoiding contact of the rocker panel. Safety and quality are LSDs highest priorities.

Valuable research and development of materials and data is integrated into our LSD product. The lateral deformation of the hinges is an important safety aspect.

LSD hinges have been tested against the hinges of our competitors. Side impact test according to ECE-R 95 and EG guideline 96/27/EWG.

A side impact test on an Audi TT equipped with LSD door hinges has been conducted by the DEKRA Accident Research and Crash Test Center according to ECE-R 95 and EG guideline 96/27/EWG. A moving barrier accelerated to 50 km/h (30 mph) to impact 100% of the side of the vehicle. A dummy (type Euro-SID 1) was utilized to measure the passenger protection and to identify the loads on head, chest, abdomen and pelvis. The side impact test impressively proved: vehicles equipped with LSD doors offer the necessary protection and guarantee optimum safety for their passengers.

The crashtest video can be viewed from three different camera angles. Tensile Force Comparative Test according to EWG guideline 70/387/EWG. The force increases permanently to 9.000 Newton.

The test takes about 10 minutes for each hinge (shown here in fast motion). The force gradually decreases after reaching the maximum force.

Each hinge is now measured how far it is reforming to its original shape. The detailed installation instructions can be downloaded in our Download section (Instructions). Disconnect the wire harness between chassis and door. MOUNTING THE GROUND PLATE TO A PILLAR AND DOOR. Modify the fender according to instructions (cutting the edge). Modify the door, depending on the vehicle model (drilling an additional hole, cutting the edge). Mount the ground plate to the mounting points of the chassis. Mount the swing arm to the mounting points of the dismantled door. Mount the door to the vehicle and completely close it. Mount the swing arm loose to the ground plate and adjust it by moving the door. Adjust the bolt for closing the door. Hang (mount) the gas shock on the mount point of the swing arm, secure it with the kit supplied security ring.

Close the door and let the door lock and set in place. Adjust opening angle and limitation. Run the wires and fix them with wire straps.

Mount the fender to the vehicle, pivot the door carefully up and make sure there is sufficient clearance on the fender, A-pillar and hood. The item "LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder" is in sale since Tuesday, December 8, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Door Hinge Conversion Kits". The seller is "d-spec1" and is located in Fresno, California.

This item can be shipped worldwide.

  • Brand: LSD Doors
  • Country/Region of Manufacture: Germany
  • Fitment Type: Performance/Custom
  • Installation: Bolt-On
  • Interchange Part Number: Vertical Doors inc
  • Manufacturer Part Number: 50011001
  • Modified Item: No
  • Placement on Vehicle: Front, Left Side
  • Style: Vertical/Scissor
  • Type: Door Hinge
  • Warranty: Unspecified Length


LSD Doors Germany Vertical Front Door Kit for Lamborghini Gallardo Coupe Spyder