Bolton Kit For

GKTech Bolt On Angle Kit with Ackerman Adjustment for Nissan R32 / R33 Skyline

GKTech Bolt On Angle Kit with Ackerman Adjustment for Nissan R32 / R33 Skyline
GKTech Bolt On Angle Kit with Ackerman Adjustment for Nissan R32 / R33 Skyline
GKTech Bolt On Angle Kit with Ackerman Adjustment for Nissan R32 / R33 Skyline

GKTech Bolt On Angle Kit with Ackerman Adjustment for Nissan R32 / R33 Skyline
GKTECH R32/R33 SKYLINE BOLT ON ANGLE KIT WITH ACKERMAN ADJUSTMENT - R33X-SSTR. The GKTECH R32/R33 Skyline bolt on angle kit is a simple, lightweight, yet super effective bolt on steering kit. It is a bolt on kit, meaning it can be fitted and removed with no modifications other than some trimming to the casting on the factory knuckle. A completely reversible install, even when used with our Super Lock Lower Control Arms! With 30% faser steering these are suitable for both the dedicated drift cars whilst working equally as well for a grip/street car looking to speed your steering up.

If you own one of these vehicles, you would know the OEM steering angle on the Skylines sucks! We measured them to having around 38 degrees lead wheel and even less trailing.

This kit will allow you to get around 60 degrees of lock lead wheel and with adjustable ackerman you can acheive near parallel front steering. We strongly recommend our bolt on rack spacer to make the most of the kit but they are an optional item as some people may already have a rack spacer. More information on this can be seen in the FAQ below. Circa 60 degrees of steering lock.

NOTE: will ONLY fit RWD knuckles. It will not fit GT-R's or GTS4 front knuckles. NOTE: You will need to modify your dustshield and remove your OEM lockstop.

Does installing this kit require a wheel alignment? Yes, it alters both toe so a wheel alignment will be required after installation.

Will this fit my car? We can only confirm fitment for the vehicles listed above under "vehicle compatibility".

If your car is not listed there, then we don't know if it will fit. Is there anything else needed for installation? There is not, however, in terms of the kit itself it will arrive as shown in the product photo. Can I install this myself?

If so how long will installation take? Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 30 minutes. However, being a suspension component we recommend only a trained professional to install this product. Do I need bolt on rack spacers?

It is not completely neccessary, if you are chasing lock, then we do recommend the bolt on rack spacers this will allow for more travel of the rack, which results in more steering lock. If you are not chasing steering lock and just want to have faster steering, then the bolt on rack spacers are not a requirement. Should I get offset rack spacers or bolt on rack spacers? This boils down to your setup, if you have low offset wheels and adjustable arms already and feel as if, if you had more lock the steering may over center, then we recommend the offset rack spacers, as they still provide adequate rack travel while also mitigating over-centering. If your setup is fairly standard and you just want to obtain more steering lock, then I would just recommend the bolt on rack spacers, which to date is adequate.

I already have inner tie rod ends that have rack spacers built in, should I get your bolt on rack spacers? The aim of the game is to unlock the full potential of the steering rack through rack spacers.

If you inner tie rod ends already have them built in, thats fine and they still can be used, but we do recommend checking if that is a limiting factor (assuming they are shorter then the ones we recommend) if they are then we suggest the bolt on rack spacers, because who doesn't like more lock right? VIP Motorsport is an official UK & European stockist of GKTech products. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Other Steering & Suspension Parts".

The seller is "vip-01513564444" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and Tobago, Vietnam, Israel.

  • Manufacturer Part Number: R33X-SSTR
  • Placement on Vehicle: Front
  • Brand: GKTECH

GKTech Bolt On Angle Kit with Ackerman Adjustment for Nissan R32 / R33 Skyline